LOGICPRESS ST PLUS
Logicpress ST PLUS is equipped with the red Failure LED to signal water shortage.
pressure-flow-switches
LOGICPRESS ST
COMPACT PRESSURE FLOW SWITCH
Starts and stops the pump depending on opening and closing of the outlets.
Stops the pump in case of water shortage and protects it from dry running.
Can be installed on surface and submersible pumps.
No need for an expansion tank, check valve, filter or fittings.
Maintenance free.
Description
TECHNICAL FEATURES
| LOGICPRESS ST | LOGICPRESS ST PLUS | LOGICPRESS ST PLUS | |
|---|---|---|---|
| Single-phase mains voltage | 230 Vac | 115/230 Vac | 115/230 Vac |
| cceptable voltage fluctuation | +/- 10% | +/- 10% | +/- 10% |
| Frequency | 50/60 Hz | 50/60 Hz | 50/60 Hz |
| Corrente max | 8 A | 8 A | 8 A |
| Power max at 115 V | 0,55 kW (0,75 HP) | 0,55 kW (0,75 HP) | |
| Power max at 230 V | 1,1 kW (1,5 HP) | 1,1 kW (1,5 HP) | 1,1 kW (1,5 HP) |
| Protection degree | IP 65 | IP 65 | IP 65 |
| Operating pressure max | 10 bar | 10 bar | 10 bar |
| Operating temperature max | 60 °C | 60 °C | 60 °C |
| Minimum flow | ~1 l/min | ~1 l/min | ~1 l/min |
| Male connections | Gc 1” | Gc 1” | Gc 1” |
Data sheet
PRESSOFLUSSOSTATI
Features of the versions
LOGICPRESS ST PLUS T
Logicpress ST PLUS T is equipped with automatic restarts and anti-jamming function.
Can be energized with either 115 V or 230 Vac.
AUTOMATIC RESTARTS
In case of stopping due to a water shortage, the devices will automatically make 10 double attempts to rearm over the 24 hours
following the failure, each lasting approximately 5 seconds to allow the pump and the system to reload if possible. The user can try to
rearm the devices at any time by pressing the Restart button.
ANTI-JAMMING FUNCTION
If for any reason the pumps remains idle for 24 consecutive hours, the device will start of the pump for about 5 seconds without affecting the
normal operation of the pressure set. In case of a temporary blackout, the pressure set will automatically rearm once the electricity returns.